CHAMBER IMAGE
Image for reference only
SPECIFICATIONS
SR NO | SPECIFICATION | HD-E705-7-1 |
1 | TEMPERATURE RANGE | -50C TO +100C |
2 | HUMIDITY RANGE | 40% TO 98% RH |
3 | DIMENSION (INTERNAL) (W X D X H) | 1500 X 1500 X 3000 MM |
4 | DIMENSION (EXTERNAL) (W X D X H) | 2850 X 1700 X 3200 MM |
5 | RAMP | VARIABLE, TEMP. 0~5C / MIN & HUMIDITY 0~5%/MIN IN AVERAGE, NO LOAD |
6 | ACCURACY | TEMP. ±1C, HUMIDITY ±2.5%RH |
7 | INTERIOR WALLS | STAINLESS STEEL 304 |
8 | EXTERIOR WALLS | COLD ROLLED STELL PLATE WITH BAKING FINISH |
9 | TEMPERATURE & HUMIDITY MEASUREMENT AND CONTROLLER | 32 BIT CONTROL AND MONITORING SYSTEM. INTERFACE FACILITY WITH RS232 PROGRAMMABLE TEMP. HUMID. CONTROLLER |
10 | VIEWING WINDOW | MULTI PANE GLASS WINDOW SIZE |
11 | PORT HOLES | 50 MM DIAMETER FOR WIRE ROUTING |
12 | POWER SUPPLY REQUIREMENT | THREE PHASE, AC380 V ± 10 %, 50 HZ |
13 | SOUND PRESSURE LEVEL | <72DB (A) |
14 | CONDENSER COOLING | WATER COOLED |
GENERAL TECHNICAL SPECIFICATION | ||
15 | THERMAL CYCLIC CHAMBER | |
15.1 | CHAMBER WITH INTERNAL AIR CIRCULATION, AND ALL THE HEATERS AND COOLING COIL LOCATED BEHIND/BELOW THE FALSE SHEET OF THE CHAMBER AND OUTSIDE THE WORKING SPACE | |
16 | INTERIOR | |
16.1 | THE CONDITIONING WITH AIR CIRCULATION TO MAINTAIN UNIFORM TEMPERATUR | |
16.2 | INTERIOR HAVE PROVISION FOR ARRANGING STAINLESS STEEL | |
17 | INSULATION | |
17.1 | INSULATION IS ASBESTOS-FREE CSC-FREE, WITH LOW THERMAL CONDUCTIVITY, POLYRTHENE PU FOAM | |
18 | COOLING SYSTEM | |
18.1 | CASCADE TYPE, REFRIGERATION SYSTEM WITH HERMETICALLY SEALED REFRIGERATION CYCLES WITH ENVIRONMENT AND OZONE FRIENDLY AND CHLORIDE FREE REFRIGERATION | |
19 | DOOR | |
19.1 | LOCKABLE FRONT OPENING, WITH DOUBLE DOOR LATCH EASY TO OPEN | |
19.2 | WITH SILICON GASKET FOR PERFECT SEALING | |
20 | VIEWING WINDOW | |
20.1 | VIEWING INTERLOCK IS SEALED TO AVOID LEAKAGE AND PROVIDED WITH HEATING PROVISION TO PREVENT CONDENSATION | |
21 | ILLUMINATION | |
21.1 | INERNALLIGHT ON VIEWING WINDOWS WITH EXTERNAL CONTROL | |
22 | TEMPERATURE MEASURING AND CONTROL SYSTEM | |
22.1 | THE TEMPERATURE MEASURING AND CONTROL SYSTEM ADOPTS MICROPROCESSOR SYSTEM AND PROVIDED WITH TOUCH PANEL FOR MONITORING AND DIGITAL DISPLAY: SUPPLIED WITH SUPPORT SOFTWARE SOFTWARE IS CAPABLE TO VISUALIZE AND GRAPHICAL ANALLYSE THE MEASURED & RECORDED VALUE. | |
A. | GRAPHICAL REPRESENTATION AND DIGITAL DISPLAY AND CONTROL OF SET AND ACTUAL VALUES | |
B. | DIGITAL INPUT AND DISPLAY OF TEMPERATURE IN DEGREE CENTIGRADE | |
C. | FAULT DIAGNOSIS SYSTEM | |
D. | 120 STROAGE OF PROGRAMMES | |
22.2 | HAVE ADJUSTABLE SAFETY CUT-OUT AGAINST HIGH AND LOW TEMPERATURE | |
22.3 | FACILITY TO PROGRAMME TEMPERATURE MEASURING USING SENSOR PT100 | |
23 | RECORDER & PC CONNECTIVITY | |
23.1 | STANDARD RS -232 INTERFACE FOR PC CONNECTIVITY | |
23.2 | RS-232 CABLE FOR PC CONNECTIVITY ALONG WITH PC CONNECTIVITY SOFTWARE | |
24 | PORT HOLES | |
24.1 | EACH PORT HOLE PROVIDED WITH SILICON SEALING BUNKER (PLUG) | |
25 | ELECTRICAL PANEL | |
25.1 | ALL POWER CONNECTORS, PROTECTION DEVICES POWER CONTROL LOGIC BUILT IN THE CONTROL PANEL INTEGRATED TO THE CHAMBER | |
25.2 | ALL ELECTRICAL CABLES TAGGED WITH ID NUMBER | |
25.3 | ALL ELECTRICAL FUNCTION CIRCUIT EQUIPPED WITH ITS OWN SAFETY DEVICE THAT SHUTS DOWN THE RELEVANT CIRCUIT OR THE ENTIRE TEST CHAMBER IF A FAULTY DEVELOPS | |
25.4 | ALL ELECTRICAL SYSTEMS COMPLY WITH RECOGNIZED TECHNICAL REGULATION AS WELL AS WITH THE ACCIDENT PREVENTION REGULATIONS. | |
26 | STANDARD PROTECTION | |
26.1 | PROTECTIVE FEATURE TO BE PROVIDED AS FOLLOWS: | |
A. | OVER LOAD TRIP & EARTH LEAKAGE TRIP FOR COMPLETE CHAMBER | |
B. | OVER LOAD TRIP FOR COMPRESSORS, HEATERS AND MOTORS | |
C. | OVER TEMPERATURE CUT-OFF FOR COMPRESSORS | |
D. | HEATER BE CUT OFF, IF AIR CIRCULATION BLOWERS ARE OFF | |
27 | OPERATING SYSTEM | |
27.1 | DETAILED OPERATING & MAINTANANCE MANUAL | |
A. | OPERATIONAL INSTRUCTION | |
B. | COMPLETE LIST PARTS | |
C. | PREVENTIVE MAINTENANCE PROCEDURE | |
D. | TROUBLE SHOOTING MEASURES | |
E. | ELECTRICAL CIRCUIT DIAGRAMS | |
28 | TESTING SAMPLE | |
28.1 | SOLOR PANELS, SIZE 2MH * 1MW * 1MD, SIZE 2MH * 1MW * 1MD | |
HUMIDITY RANGE:
DETAIL CHAMBER IMAGE:
CONTROL PANEL CIRCUIT BOARD
COOLING SYSTEM
CHAMBER DRAWING
Front view
Top view